Round bars come in various standard sizes, typically ranging from a few millimeters to several inches in diameter. The specific sizes available may vary depending on the material and supplier.
What is Titanium Grade 5, and what makes it suitable for bars and shafts?
Titanium Grade 5, also known as Ti-6Al-4V, is a popular titanium alloy renowned for its exceptional properties that make it highly suitable for bars and shafts. This alloy is composed of approximately 90% titanium, 6% aluminium, and 4% vanadium. Combining these elements results in a material with outstanding strength, corrosion resistance, and low density. Titanium Grade 5 exhibits a remarkable strength-to-weight ratio, surpassing many other metals, including steel. This attribute makes it an ideal choice for applications where weight reduction is crucial while maintaining structural integrity.
Additionally, Titanium Grade 5 demonstrates excellent resistance to various corrosive environments, including seawater, acids, and chlorides, making it highly reliable in demanding conditions. Its remarkable biocompatibility also contributes to its widespread use in medical and surgical implants. With its impressive mechanical properties, resistance to corrosion, and versatility, Titanium Grade 5 is an exceptional choice for producing bars and shafts used in aerospace, automotive, marine, chemical processing, and medical industries, among others.
Table Of Content
What are the key properties and characteristics of Titanium Grade 5 bars and shafts?
Titanium Grade 5 bars and shafts possess key properties and characteristics contributing to their desirability in various applications. First and foremost, they exhibit an excellent strength-to-weight ratio, offering a high strength level while significantly lighter than many other metals. This property makes them ideal for weight reduction applications without compromising structural integrity. Titanium Grade 5 bars and shafts demonstrate exceptional corrosion resistance, enabling them to withstand harsh environments, including seawater, acids, and chlorides. This corrosion resistance ensures longevity and reliability in challenging conditions. This titanium alloy maintains its mechanical properties at elevated temperatures, allowing it to withstand high-temperature environments without significant degradation.
Another noteworthy characteristic is its biocompatibility, making Titanium Grade 5 bars and shafts suitable for medical and surgical applications. This alloy exhibits excellent fatigue strength, fracture toughness, and low modulus of elasticity, enhancing its performance in dynamic applications where durability and resistance to deformation are critical. The key properties and characteristics of Titanium Grade 5 bars and shafts make them highly desirable for various industries, including aerospace, automotive, marine, chemical processing, and medical.
|Titanium Grade 5 Round Bars Specification|
|ASTM/ ASME Standard||ASTM B348 / ASTM SB348|
|Dimensions||EN, DIN, JIS, ASTM, BS, ASME, AISI, ASTM, ASME|
|Size Ranging From||5 To 500 millimeter|
|Diameter in mm||0.1 to 100 millimeter|
|Supply Length||100 To 3000 millimeter Long or Above than it|
|Finishes We Provide||Rough, BA Finish, Polished, NO.4 Finish, Black, Matt Finish, Bright, Turned|
|Tolerance||H8, H10, H12, H11, H13K9, K11, K10, H9, K12 or as per clients’ specification|
|Form||Hex (A/F), Square, Ingot, Rectangle,Forging, Billet, Round|
|Titanium Grade 5 Shafts Specification||Dimensions||EN, DIN, JIS, ASTM, BS, ASME, AISI, ASTM, ASME|
|Diameter||Outside Diameter upto 550mm|
|Length||1000 mm to 6000 mm Long & Above|
|Tolerance||H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements|
|Finish||Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish|
|Surface||Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline|
|Condition||Centreless Ground & Polished|
|Titanium Gr 5||3.7165||R56400|
|Products cut include Round bars, flat bars, hex bars, square bars, tubing and hollow bars, Pipe, angles, channels, beams and tees. Thickness range is 1/16″ to 28″ diameter|
Bars Production Cutting
|We can provide production cutting for product diameters up to 4″. We utilize production equipment to achieve these precision cuts with tight tolerances.|
|Products polished included all tubular products, with OD & ID polishing available, round bars, square bars, hex & flat bars, angles, uneven leg angles, beams, and other shapes.|
|Titanium Gr 5||0.10 max||0.05 max||0.40 max||5.5-6.75 max||0.20 max||0.015 max||bal||3.5-4.5|
|Min.Tensile(KSI)||Min.Yield(KSI)||Hardness||Tensile Modulus||Poisson's Ratio|
|130||120||16.4||114 GPa||0.30 - 0.33|
Titanium Grade 5 Bars in Shaft Making
Titanium Grade 5 Bars & Shafts in Automobiles
Ti Gr 5 Bars & Shafts in Electric Motors & Pumps
Ti Gr 5 Bars & Shafts in Railways
Ti Gr 5 Bars & Shafts in Mining
Titanium Grade 5 Bars & Shafts in Miscellaneous Fabrication