What are the standard sizes of round bars?
Round bars come in various standard sizes, typically ranging from a few millimeters to several inches in diameter. The specific sizes available may vary depending on the material and supplier.
What is Inconel 718, and what are its properties?
Inconel 718 is a nickel-based superalloy with exceptional mechanical properties and high resistance to extreme temperatures and corrosive environments. It is composed primarily of nickel, with significant additions of chromium, iron, and niobium, along with smaller amounts of molybdenum, titanium, aluminium, and other elements. This combination of elements gives Inconel 718 remarkable strength, excellent creep and fatigue resistance, and good corrosion resistance.
Its tensile strength and toughness remain intact even at elevated temperatures, making it suitable for applications in demanding environments such as aerospace, gas turbine engines, nuclear reactors, and chemical processing. Inconel 718 is also known for retaining its mechanical properties over a wide temperature range, from cryogenic temperatures up to approximately 1300°C (2372°F). The unique properties of Inconel 718 make it a preferred choice for critical applications where strength, durability, and resistance to high temperatures and corrosive environments are essential.
Table Of Content
About Inconel 718 Bars & Shafts
Inconel Alloy 718 Bars and Shafts Specification
Stock Availability of Inconel 718 Bars, Shafts
Equivalent Grades Of Inconel 718 Shafts
Processing Of Inconel 718 Bars
Chemical Composition of Inconel 718 Bars
Mechanical Properties of Inconel 718 Shafts
Inconel 718 Bars and Shafts Ready Stock
What are the applications of Inconel 718 bars and shafts?
Inconel 718 Bars and Shafts find extensive applications in various industries due to their exceptional properties. One primary application is in the aerospace sector, where they are utilized in components such as turbine discs, compressor blades, and engine casings. The high strength and temperature resistance of Inconel 718 make it suitable for withstanding the demanding conditions of jet engines, where it helps enhance fuel efficiency and overall performance. In the oil and gas industry, Inconel 718 Bars and Shafts are employed in downhole tools, wellhead components, and valves, as they can endure the corrosive and high-pressure environments encountered during exploration and production operations.
The chemical processing industry also benefits from using Inconel 718, particularly in applications involving exposure to aggressive chemicals and high temperatures, such as reactors, heat exchangers, and catalytic cracking units. Other sectors that rely on Inconel 718 bars and shafts include power generation, utilized in gas turbines and nuclear reactors, and in automotive and racing industries for connecting rods and other high-performance engine components. The versatility and reliability of Inconel 718 bars and shafts make them indispensable in critical applications that demand strength, corrosion resistance, and elevated temperature capabilities.
Inconel 718 Round Bars Specification | |
---|---|
Standard | ASTM B637/ ASME SB637 |
Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Size | 5 mm To 500 mm |
Length | 9 – 12 metres |
Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
Finish | Cold drawn, Bright drawn, Centreless ground, Cold finished, Peeled and turned, Smooth turned, Slit rolled edge, Hot finished, Hot rolled, Rough turned/peeled, Peeled and reeled |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Inconel 718 Shafts Specification | |
---|---|
Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Size | 16 - 200 mm |
Shape | Round |
Usage/Application | Industrial |
Length | 3m to 6m |
Dia | 8 mm~400 mm |
Technique | Hot Rolled |
Application | Automobile Industry, Construction, Pharmaceutical / Chemical Industry, Oil & Gas Industry |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Inconel 718 | 2.4668 | N07718 | - | - | - | - | - |
Bars Cutting |
Products cut include Round bars, flat bars, hex bars, square bars, tubing and hollow bars, Pipe, angles, channels, beams and tees. Thickness range is 1/16″ to 28″ diameter |
Bars Production Cutting |
We can provide production cutting for product diameters up to 4″. We utilize production equipment to achieve these precision cuts with tight tolerances. |
Bars Polishing |
Products polished included all tubular products, with OD & ID polishing available, round bars, square bars, hex & flat bars, angles, uneven leg angles, beams, and other shapes. |
Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
Inconel 718 | 0.08 max | 0.35 max | 0.35 max | 0.015 max | 0.30 max | - | 50.00 - 55.00 | 17.00 - 21.00 |
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Inconel 718 | 8.2 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 482 | 45 % |
Inconel 718 Bars in Shaft Making
Inconel 718 Bars & Shafts in Automobiles
Inconel 718 Bars & Shafts in Electric Motors & Pumps
Inconel 718 Bars & Shafts in Railways
Inconel 718 Bars & Shafts in Mining
Inconel 718 Bars & Shafts in Miscellaneous Fabrication
Your #1 Source for Inconel 718 Bars & Shafts
Inconel 718 Bars & Shafts Stock Availability
Hex Bar
Round bars are steel bars with a smooth surface that are employed in construction projects that don't call for highly reinforced concrete works. It is frequently used on pipes, roads, small and medium-sized projects, beam and column stirrups, and stirrups.
Inconel 718 Hex Bar, UNS N07718 Hex Bar, Inconel 718 Hex Bar Supplier, 718 Inconel Hexagonal Bar, Nickel Alloy 718 Hex Bar, Inconel 718 Hex Rod, 2.4668 Hex Bar, 718 Inconel Alloy Hex Bars Price, Inconel 718 Hex Bar Sizes, Alloy 718 Hexagon Bars, Inconel Alloy 718 Hex Bar Exporter.
Rectangle Bar
Solid metal bar with a square cross section is known as a square bar. Grill fencing, fabrications, engineering components, window grills, and the construction of water and fuel tanks are only a few of its many uses.
Alloy 718 Rectangular Bars, UNS N07718 Rectangle Bar, Inconel 718 Rectangle Bar Supplier, 2.4668 Rectangle Bar, Nickel Alloy 718 Rectangle Bar, Inconel 718 Rectangle Bar Sizes, 718 Inconel Rectangular Bar, Inconel 718 Rectangle Bar, Inconel 718 Rectangle Rod, 718 Inconel Alloy Rectangle Bars Price, Inconel Alloy 718 Rectangle Bar Exporter.
Square Bar
A flat bar is a portion having square sides of various diameters and a flat, rectangular section. This versatile steel product is distributed in the construction, engineering, manufacturing, mining, grating, fabrication, and many other industries because it is reasonably priced.
Alloy 718 Square Bars, 718 Inconel Alloy Square Bars Price, Nickel Alloy 718 Square Bar, 2.4668 Square Bar, Inconel 718 Square Bar Sizes, Inconel 718 Square Bar Supplier, Inconel 718 Square Bar, 718 Inconel Square Bar, Inconel 718 Square Rod, UNS N07718 Square Bar, Inconel Alloy 718 Square Bar Exporter.
High Precision Shaft
There are several applications for Inconel hexagonal rods. The majority of the time, they are used in various structural and constructional applications. These rods are employed as equipment in a variety of industries, including chemical, food processing, marine, petroleum, sea water, etc. They are extremely adaptable.
Inconel 718 Square Rod, 718 Inconel High Precision Shaft, Inconel 718 High Precision Shaft Supplier, Alloy 718 High Precision Shafts, Inconel 718 High Precision Shaft Sizes, 2.4668 High Precision Shaft, Inconel 718 High Precision Shaft, UNS N07718 High Precision Shaft, 718 Inconel Alloy High Precision Shafts Price, Nickel Alloy 718 High Precision Shaft, Inconel Alloy 718 High Precision Shaft Exporter.
Electric Motor Shaft
As with hot rolled bars, forged bars are formed by heating a billet of steel until it is malleable. To get the bar to the desired rough dimensions, forging either hammers or presses the bar, which is where the techniques diverge.
Inconel 718 Electric Motor Shaft Sizes, Inconel 718 Electric Motor Shaft Supplier, Inconel 718 Square Rod, 718 Inconel Electric Motor Shaft, UNS N07718 Electric Motor Shaft, Nickel Alloy 718 Electric Motor Shaft, 718 Inconel Alloy Electric Motor Shafts Price, Alloy 718 Electric Motor Shafts, 2.4668 Electric Motor Shaft, Inconel 718 Electric Motor Shaft, Inconel Alloy 718 Electric Motor Shaft Exporter.
Eccentric Shaft
The versatile material inconel rectangular bar is utilised in a variety of industries, including shipbuilding, construction, and the automobile industry. Because of its durability against oxidation and corrosion, it is frequently used in outdoor-oriented items.
Inconel 718 Square Rod, UNS N07718 Eccentric Shaft, 718 Inconel Alloy Eccentric Shafts Price, 718 Inconel Eccentric Shaft, Inconel 718 Eccentric Shaft Supplier, Nickel Alloy 718 Eccentric Shaft, 2.4668 Eccentric Shaft, Inconel 718 Eccentric Shaft, Alloy 718 Eccentric Shafts, Inconel 718 Eccentric Shaft Sizes, Inconel Alloy 718 Eccentric Shaft Exporter.